PRODUCT CATALOG
EZ Start Kit+ (ESP32)
ESP32
Elementary & Middle School
EZ Start Kit+ (ESP32) is a three-in-one expansion board. Depending on the project, you can choose a micro:bit, LinkIt 7697, or ESP32 board. Built-in modules such as a light sensor, buzzer, and OLED display make it easy for beginners to try a variety of sensing and output experiments.
| Grade level | Elementary & Middle School |
|---|---|
| Programming | MakeCode / Scratch / Arduino IDE / Python / JavaScript |
| SKU | 368030200655 |
Features
- Three-in-one expansion board: supports micro:bit, LinkIt 7697, and ESP32 boards. Choose the board that fits your project for more development options.
- LEGO brick holes: work with LEGO-based projects.
- Buttons A and B: two small black round buttons, about 6.5 mm in diameter, that let you enter commands and control the expansion board.
- DHT11 temperature and humidity sensor: measures temperature and humidity. It reads the air temperature (0–50 °C) and relative humidity (%), and the readings can be shown on the 1.3-inch OLED screen.
- Single-color LEDs: there are three colors—red, yellow, and green. With these three LEDs you can practice lighting an LED with code and also build a small traffic light project.
- Light sensor: uses a photoresistor to detect ambient light. Readings range from 0 to 4095, and a larger value means stronger light.
- RGB LEDs: above the single-color LEDs are the same number of RGB LEDs. Unlike ordinary color LEDs, they have a built-in driver chip, so a single signal line is enough to light them in different colors.
- Passive buzzer: can be programmed to make sounds, play music you write yourself, or serve as an alarm.
- Infrared receiver: receives signals sent by an infrared remote control. An infrared remote control is required to use this feature.
- OLED display: a 1.3-inch OLED screen that shows sensor readings and can also be used to debug programs.
- Relay: its main function is to control a high-current component with a small current. In short, it is an electronic switch: when it is powered, it connects internally, and when it is not, it disconnects.
- Potentiometer: reading the potentiometer in code returns a value from 0 to 4095, and you change the value by turning the knob. It can be used in projects that need adjustable control, for example, adjusting LED brightness with a potentiometer.
Orders and teacher training
Phone: +886-7-556-4686 E-mail [email protected]
26F-3 (A2), No. 502, Jiuru 1st Rd., Sanmin Dist., Kaohsiung City 807404, Taiwan (R.O.C.)
Kit page: https://edu.icshop.com.tw/en/products/esp32-en/ez-start-kit-plus-en-3/
