Line-Following Car

What this kit teaches

Course outline

01 Assembly (2 class periods)

Unit contents

• Getting started with assembly
• Preparing the tools
• Soldering the motors and reinforcing the wire ends
• Removing the protective film from the chassis and installing the auxiliary wheel
• Installing the encoder discs and DC motors

Related article: Arduino Car Tutorial Series—Unit 1: Assembly

02 Motion control (1 class period)

Unit contents

• Downloading and installing the code editor
• Basic operation
• Adjusting steering
• Advanced operation

Related article: Arduino Car Tutorial Series—Unit 2: Motion Control

03 Line following and obstacle avoidance (2 class periods)

Unit contents

• Adding line following
• Adding obstacle avoidance

Related article: Arduino Car Tutorial Series—Unit 3: Line Following and Obstacle Avoidance

04 Developing with Arduino IDE (2 class periods)

Unit contents

• Introduction to writing Arduino code
• Code walkthrough

Related article: Arduino Car Tutorial Series—Unit 4: Developing with Arduino IDE

This course outline is based on existing CIRCUS Pi tutorial articles. Class period counts are estimates and can be adjusted for your class.

2022 version

2018 version

Hardware specifications

Item	Qty
Smart car chassis kit	1
UNO R3 Enhanced Edition for Arduino®	1
Sensor Shield V5.0 for Arduino®	1
Circus L9110 motor driver module, single board, pin headers	1
Infrared line-tracking sensor module	2
TOSHIBA AA batteries	4
M3 hex fine-thread brass standoff, 10 mm	6
M3 hex female-female fine-thread brass standoff, 30 mm	2
M3 colored hex nut	1
M3 × 8 mm Phillips pan-head screw (colored)	1
Colored Dupont jumper wires (female/female) with 1P-1P female connectors, 30 cm	2

Product features

• Selected modules
1. Motor driver module

The car’s motors are controlled by the Circus L9110 motor driver module, for stable, reliable operation. It connects to two DC motors. Each motor is controlled by two signal lines: setting those lines high or low switches the motor between forward and reverse, and PWM output controls the speed. External power can be up to 12 V, which suits projects that need drive power, such as cars and electric fans.

2. Line-following module

The line-following module uses a TCRT5000 infrared reflective sensor with a detection distance of about 1 mm to 25 mm. The digital signal is simple to use: the output is 0 over a black surface (line) and 1 over a white surface (line), so it easily detects either a black line or a white line. An LED on the back of the sensor module turns on and off with the sensing state (the LED is lit when an object is within detection range), which makes debugging and checking the program logic easier.

• Flexible expansion

The Arduino Sensor Shield expansion board stacks directly on top of the Arduino UNO. It extends all of the digital and analog pins and has dedicated ports for I2C, UART, and Bluetooth. The function pins are laid out alongside power pins, which makes it easy to connect sensors and servo motors. The board has a socket for connecting the battery holder’s power cable, plus a power indicator LED and a Reset button.

Video